VHDL Design

If the T input is high, the T flip-flop changes state (i.e. toggles) whenever the clock input is applied. If the T input is low, the flip-flop holds the previous value. VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity T_FF is     Port ( T : in  STD_LOGIC;            clk : in  STD_LOGIC;            Q : out  STD_LOGIC;            rst : in  STD_LOGIC); end T_FF; architecture Behavioral of T_FF is signal temp : std_logic; begin process(clk,rst,t) begin if (rst='1') then temp <= '0'; elsif(clk'event and clk ='1') then if(T='1') then temp <= not temp; end if; end if; end process; Q <= temp; end Behavioral; Testbench: LIBRARY ieee; USE ieee.std_logic_1164.ALL;   ENTITY T_FF_tb IS END T_FF_tb;   ARCHITECTURE behavior OF T_FF_tb IS        -- Component Declaration for the Unit Under Te...

In electronics, a flip-flop or latch is a circuit that has two stable states and can be used to store 1-bit of information. The circuit can be made to change state by signals applied to one or more control inputs and will have one or two outputs. It is the basic storage element in sequential logic. The D flip-flop, which is widely used, also known as a "data" or "delay" flip-flop. The D flip-flop captures the value of the D-input at a definite portion of the clock cycle (such as the rising edge or falling edge of the clock). That captured value becomes the Q output. At other times, the output Q does not change. VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity D_FF is     Port ( D : in  STD_LOGIC;            clk : in  STD_LOGIC;            Q : out  STD_LOGIC); end D_FF; architecture Behavioral of D_FF is begin process begin --if (clk'event and clk='1') then wait until cl...

The output of a priority encoder is the binary representation of the index of the most significant activated line, starting from zero. They are often used to control interrupt requests by acting on the highest priority interrupt input. If two or more inputs are given at the same time, the input having the highest priority will take precedence. VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity Priority_encode is port(I : in std_logic_vector(3 downto 0); Y : out std_logic_vector(1 downto 0); P : out std_logic); end Priority_encode; architecture Behavioral of Priority_encode is begin P <= I(0) or I(1) or I(2) or I(3); Y <= "11" when I(3) = '1' else "10" when I(2) = '1' else "01" when I(1) = '1' else "00" when I(0) = '1' else "ZZ"; end Behavioral; Testbench: LIBRARY ieee; USE ieee.std_logic_1164.ALL; ENTITY PE_tb IS END PE_tb;   ARCHITECTURE behavior OF PE_tb I...

VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity Compare_4 is     Port ( A : in  STD_LOGIC_VECTOR (3 downto 0);            B : in  STD_LOGIC_VECTOR (3 downto 0);            Eq : out  STD_LOGIC;            Gt : out  STD_LOGIC;            Lt : out  STD_LOGIC); end Compare_4; architecture Behavioral of Compare_4 is begin process (a,b) is     begin         if (a=b) then             eq <= '1';             gt <= '0';             lt <= '0';         elsif (a<b) then             eq <= '0';             gt <= '0';             lt <= '1';         else     ...

Comparator circuit is used to compare two input signals and generates signals accordingly. The 4-bit comparator circuit compares two 4-bit numbers and generates 1-bit signals less than(Lt), greater than(Gt) or equal to(Eq). Irrespective of size of input numbers being compared the output signals remains the same. VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity compare_4 is     Port ( A : in  STD_LOGIC_VECTOR (3 downto 0);            B : in  STD_LOGIC_VECTOR (3 downto 0);            Eq : out  STD_LOGIC;            Gt : out  STD_LOGIC;            Lt : out  STD_LOGIC); end compare_4; architecture Behavioral of compare_4 is begin Eq <= '1' WHEN A = B ELSE '0' ; Gt <= '1' WHEN A > B ELSE '0' ; Lt <= '1' WHEN A < B ELSE '0' ; end Behavioral; Testbench: LIBRARY ieee; USE ieee.std_logic_1164.ALL; ENTITY Compar...

A binary decoder is a combinational logic circuit that converts binary information from the n coded inputs to a maximum of 2^n unique outputs.  VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity decoder38 is     Port ( A : in  STD_LOGIC_VECTOR(2 downto 0);            G1,G2b,G3b : in  STD_LOGIC;            Y : out  STD_LOGIC_VECTOR (7 downto 0)); end decoder38; architecture Behavioral of decoder38 is signal en : std_logic_vector (5 downto 0) ; begin en <= (G1 & G2b & G3b) & A ; with en select  y <= "00000001" when "100000", "00000010" when "100001", "00000100" when "100010", "00001000" when "100011", "00010000" when "100100", "00100000" when "100101", "01000000" when "100110", "10000000" when "100111", "00000000" when others; en...

The following VHDL Code is written using when-else statement. D input is permanently held logic HIGH, while select input S changes through 000 to 111, connecting D to output line Y0 to Y7 respectively. VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity Demux_1to8 is     Port ( D : in  STD_LOGIC;            S : in  STD_LOGIC_VECTOR (2 downto 0);            Y : out  STD_LOGIC_VECTOR (7 downto 0)); end Demux_1to8; architecture Behavioral of Demux_1to8 is begin      Y <=  "0000000"&D   when S="000" else "000000"&D&'0'      when S="001" else "00000"&D&"00"    when S="010" else "0000"&D&"000"   when S="011" else "000"&D&"0000"   when S="100" else "00"&D&"00000"   when S="101" else '0'&D&"000000"     when S="110...

The demultiplexer is a combinational logic circuit designed to switch one input line to one of several separate output lines. It is exactly opposite of Multiplexer. In 1-to-4 Demux the input line is connected to one of the 4 output lines depending on the select line input. The below VHDL code is written using case-when  statement. VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity Demux_14 is     Port ( Din : in  STD_LOGIC;            Sel : in  STD_LOGIC_VECTOR (1 downto 0);            dout : out  STD_LOGIC_VECTOR (3 downto 0)); end Demux_14; architecture Behavioral of Demux_14 is begin process(din,sel) begin case sel is when "11" => dout <= din&"000"; when "10" => dout <= '0'&din&"00"; when "01" => dout <= "00"&din&'0'; when others => dout <= "000"&din; end case; end process; end Behavioral; Testbench: LIB...

This video will guide you through the Xilinx ISE 14.7 webpack (free) New Project Creation wizard. The video covers the 2 input AND gate design using dataflow style modelling and testing the same design by writing the testbench. Subscribe the channel to get new video notifications. Thank You.

Shift registers in digital systems are group of Flip-flops connected together to store multiple bits of data and are used to Shift the stored data to Left or Right.  The register that shifts the bits towards left (from LSb to MSb) are called Left Shift Registers and the one which shifts the bits towards right (from MSb to LSb) are called Right Shift Registers. The following VHDL code is written for 4-bit Left Shift Register which allows serial input and serial output (SISO). The design has asynchronous reset pin (rst), when active (HIGH), resets (output=0000) the Shift register. Otherwise, the design will load 1-bit data on every active edge of the clock into the register and at the same time 1-bit data output is generated. VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity Left_SR is     Port ( Sin : in  STD_LOGIC;            clk,rst : in  STD_LOGIC;            Sout : out  STD_LOGIC); en...

The  4-to-1 Multiplexer is used to select between multiple input lines based on select line. The below code is written using  case-when  statement (requential statement). VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity Mux_41 is     Port ( I : in  STD_LOGIC_VECTOR (3 downto 0);            s : in  STD_LOGIC_vector(1 downto 0);            Y : out  STD_LOGIC); end Mux_41; architecture Behavioral of Mux_41 is begin process(I,s) begin case s is when "00" => Y <= I(0); when "01" => Y <= I(1); when "10" => Y <= I(2); when "11" => Y <= I(3); when others => Y <= 'Z'; end case; end process; end Behavioral; Testbench: LIBRARY ieee; USE ieee.std_logic_1164.ALL;   ENTITY Mux_41_tb IS END Mux_41_tb;   ARCHITECTURE behavior OF Mux_41_tb IS        -- Component Declaration for the Unit Und...

4-to-1 Multiplexer is used to select between multiple input lines based on select line. The below code is written using  with-select-when  statement (concurrent statement). Also enable signal is added for better control. If Enable='1',(i.e.active HIGH), the MUX will work else, with Enable='0', the MUX circuit will produce 'Z' as output. The VHDL code starts with declaration of 3-bit signal 'sig', which gets the value from Enable signal 'en' and two select line input signals S1 and S0 respectively. (& is the concatenation operator) VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity Mux_41 is     Port ( I : in  STD_LOGIC_VECTOR (3 downto 0);            s0 : in  STD_LOGIC;            s1 : in  STD_LOGIC;            en : in  STD_LOGIC;            Y : out  STD_LOGIC); end Mux_41; architecture Behavioral of Mux_41 is ...

4-to-1 Multiplexer is used to select between multiple input lines based on select line. The below code is written using when-else statement (concurrent statement). Also enable signal is added for better control. If Enable='1',(i.e.active HIGH), the MUX will work else, with Enable='0', the MUX circuit will produce 'Z' as output. VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity Mux41 is     Port ( I : in  STD_LOGIC_VECTOR (3 downto 0);            S0,S1 : in  STD_LOGIC;            En : in  STD_LOGIC;            Y : out  STD_LOGIC); end Mux41; architecture Behavioral of Mux41 is begin Y <= I(0) when En = '1' and S1='0' and s0='0' else I(1) when En = '1' and S1='0' and s0='1' else I(2) when En = '1' and S1='1' and s0='0' else I(3) when En = '1' and S1='1' and s0='1' else 'Z'; end Behavioral; Testbench: LIBRARY ieee; USE ieee.s...

In electronics Multiplexer (also called MUX) is a circuit that has several inputs and one output line. The output depends on the select line input signal. In the following example the 8-to-1 MUX is written in structural modelling style while the components which are used in design are written with behavioral style. (4-to-1 MUX is written using sequential statement case-when while 2-to-1 MUX is written using concurrent statement when-else .) VHDL Code: library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity Mux_81 is     Port ( D : in  STD_LOGIC_VECTOR (7 downto 0);            S : in  STD_LOGIC_VECTOR (2 downto 0);            Y : out  STD_LOGIC); end Mux_81; architecture Behavioral of Mux_81 is signal y1,y2 : std_logic; component Mux_41 is port(I : in std_logic_vector(3 downto 0); S : in std_logic_vector(1 downto 0); Y : out std_logic); end component; component Mux_21 is port (I0,I1,S : in std_...